Page 1 of 6

BIO-MASTERS (Now in production)

Posted: Sun Sep 27, 2015 11:23 pm
by Bio-Masters
Image

Promotional Art
ImageImageImage
Image

Bio-Mass Monster Review


Bio-Mass C2E2 Interview (Bio-Masters starts at 4m 35s)


Bio-Mass Monster Prototype Master
Image

First run Bio-Masters Prototypes
The first 13 of each Monster and Mutant were cast and prototyped by The Godbeast Marty Hansen.
Image
Image
Image
Image

Re: BIO-MASTERS

Posted: Tue Sep 29, 2015 9:41 pm
by astro
My killer BIO-MASTERS. Thank you Pat and Marty! Can't wait to see more from this line.
Image

Re: BIO-MASTERS

Posted: Wed Sep 30, 2015 11:57 pm
by Bio-Masters
I am casting more Bio-masters right now, getting ready for DesignerCon. Also, there are a couple of new parts in the works. One is a Tri-hub split and I will for sure have some cast up for D-Con!

Tentaclepallooza!

Re: BIO-MASTERS

Posted: Thu Oct 01, 2015 10:50 am
by Fuzz
Are these ever going to be available on a wider scale, similar to other Glyos drops?

Re: BIO-MASTERS

Posted: Fri Oct 02, 2015 10:31 am
by Bio-Masters
Right now I am focusing on casting them in resin. I want to keep making these and getting them out to people. They are a blast to build with.

The prototypes Marty "The Godbeast" made for me, have been sent to the factory and we got a quote back last year that was just to high the way it was. I went down to Kansas to True Cast studio with Marty and we made some changes in hopes to make the figure easier to cast, and hopefully something a bit more financially viable to produce.

Re: BIO-MASTERS

Posted: Fri Oct 02, 2015 11:11 am
by Fuzz
Bio-Masters wrote:Right now I am focusing on casting them in resin. I want to keep making these and getting them out to people. They are a blast to build with.

The prototypes Marty "The Godbeast" made for me, have been sent to the factory and we got a quote back last year that was just to high the way it was. I went down to Kansas to True Cast studio with Marty and we made some changes in hopes to make the figure easier to cast, and hopefully something a bit more financially viable to produce.

Ahhh, ok. So how does one acquire these figures now? Also, how durable are they?

Re: BIO-MASTERS

Posted: Fri Oct 02, 2015 10:28 pm
by Bio-Masters
Right now DesignerCon is the next time they will be avaliable. I will post here on the forum as I finish them. I will also make them avaliable online after the show. I will make sure to post in the forums as they get cast up.

As far as durability goes, they are tough but they are resin. I play with my resin parts all the time. When you combine resin with regular Glyos figures they work great. When the resin is used with other resin parts you need to heat the pieces up (a hair dryer works great) to keep them from chipping each other because there is little give, unlike plastic.

Re: BIO-MASTERS

Posted: Sat Oct 03, 2015 12:22 pm
by Faceless Master
Great to hear! I have been eyeballing these things for days... Cant wait for DCon!!

Re: BIO-MASTERS

Posted: Mon Oct 05, 2015 10:56 am
by Bio-Masters
I can't wait for DCon as well. I had such a great time last year. It was awesome to meet so many of the people who make this whole thing so great.

Re: BIO-MASTERS

Posted: Tue Oct 13, 2015 12:22 pm
by Faceless Master
Bio-Masters wrote:The prototypes Marty "The Godbeast" made for me, have been sent to the factory and we got a quote back last year that was just to high the way it was. I went down to Kansas to True Cast studio with Marty and we made some changes in hopes to make the figure easier to cast, and hopefully something a bit more financially viable to produce.


I know I can not be the first to bring this up but what about a pre-order system or crowd fund to get the cash in had to get them started so its not all on you (and your wallet) to make the first step? I am sure this community could reach deep into the couch cushions to help make this a reality. I know I want a freakin' ARMY of these things in production plastic.

Do a Glyaxia run and I bet Balok will fund at least half of it right there :mrgreen:

Re: BIO-MASTERS

Posted: Wed Oct 14, 2015 6:12 pm
by Bio-Masters
Faceless Master wrote:I know I can not be the first to bring this up but what about a pre-order system or crowd fund to get the cash in had to get them started so its not all on you (and your wallet) to make the first step? I am sure this community could reach deep into the couch cushions to help make this a reality. I know I want a freakin' ARMY of these things in production plastic.

Do a Glyaxia run and I bet Balok will fund at least half of it right there :mrgreen:



I am thankful and excited by all the people who have come out and said that they would back some sort of funding if I were to do one. That is one of the great things about the Glyos community. I would not be opposed to pursuing that option. Right now the focus is to cast figures for DesignerCon and see if the changes we made to the figures will help make this thing more cost effective.

As far as Glyaxia Colors, that would defiantly be one I would love to see. It is one of my favorite color waves. In fact when the Godbeast made the first batch of Bio-Mass Mutants for me, he made me a pair of Glyaxia for building and displaying them.
Image

Re: BIO-MASTERS

Posted: Thu Oct 15, 2015 2:02 am
by THEGODBEAST
Faceless Master wrote:
Bio-Masters wrote:The prototypes Marty "The Godbeast" made for me, have been sent to the factory and we got a quote back last year that was just to high the way it was. I went down to Kansas to True Cast studio with Marty and we made some changes in hopes to make the figure easier to cast, and hopefully something a bit more financially viable to produce.


I know I can not be the first to bring this up but what about a pre-order system or crowd fund to get the cash in had to get them started so its not all on you (and your wallet) to make the first step? I am sure this community could reach deep into the couch cushions to help make this a reality. I know I want a freakin' ARMY of these things in production plastic.

Do a Glyaxia run and I bet Balok will fund at least half of it right there :mrgreen:


Right on my brutha!!!

We have been discussing the options and what you suggest is definitely an option.

We will know more and be ready to figure something out in early 2016 I'm sure!

Hang in there and in the meantime...nothing like tasty Pat B. prototypes to wet the appetite!!!

TGB

Re: BIO-MASTERS

Posted: Thu Oct 15, 2015 4:21 pm
by Cappy
THEGODBEAST wrote:...nothing like tasty Pat B. prototypes to wet the appetite!!!

Hmm, I never thought of Pat Bussey as tasty. But whatever tickles the taste buds of you insect-men.

Re: BIO-MASTERS

Posted: Thu Oct 15, 2015 5:11 pm
by mushbuh
i love the cotton candy colors on this guy..
Image

Re: BIO-MASTERS

Posted: Mon Oct 19, 2015 6:55 pm
by Faceless Master
Bio-Masters wrote:I am thankful and excited by all the people who have come out and said that they would back some sort of funding if I were to do one. That is one of the great things about the Glyos community. I would not be opposed to pursuing that option. Right now the focus is to cast figures for DesignerCon and see if the changes we made to the figures will help make this thing more cost effective.

As far as Glyaxia Colors, that would defiantly be one I would love to see. It is one of my favorite color waves. In fact when the Godbeast made the first batch of Bio-Mass Mutants for me, he made me a pair of Glyaxia for building and displaying them.


Oh yeah, I am in as these guys represent so many possibilities in the Glyos universe. For all lines really. See you guys in Pasadena!

Re: BIO-MASTERS

Posted: Sat Oct 24, 2015 7:57 pm
by Meadowknight
These are really neat! I love the narwal horn, that's a nice touch...and fun colors. I won't have a booth this year (too busy, urrg)...but I hope to attend Dcon as a guest at least, if I do I'll try to find ya to take a peek at these in person.

Re: BIO-MASTERS

Posted: Wed Oct 28, 2015 10:16 am
by Bio-Masters
I am getting really excited about Designer-Con. I look forward to meeting all of you. Make sure you guys come up and introduce yourself.

Also I colored this Bio-Mass Mutant this week.

Image

Re: BIO-MASTERS

Posted: Fri Oct 30, 2015 2:05 am
by THEGODBEAST
Bio-Masters wrote:I am getting really excited about Designer-Con. I look forward to meeting all of you. Make sure you guys come up and introduce yourself.

Also I colored this Bio-Mass Mutant this week.

Image


Friggin' killer Pat!!!

When are we gonna see a Bio Mass Monster or Bio Mass Mutant battling a Zullbeast???


Image

Re: BIO-MASTERS

Posted: Wed Nov 04, 2015 2:08 pm
by Bio-Masters
Getting ready for Designer Con 2015. More pics soon.

Image
Image
Image
Image
Image
Image

Re: BIO-MASTERS

Posted: Wed Nov 04, 2015 10:31 pm
by hellscrape
These look awesome! I can't wait to drill over them in person!

Re: BIO-MASTERS

Posted: Tue Nov 24, 2015 3:07 pm
by Bio-Masters
I wanted to say a big THANK YOU to every one who came out to the show and introduced yourself, bought stuff, and hung out. Thanks for continuing to support Bio-Masters!

Image

Re: BIO-MASTERS

Posted: Thu Nov 26, 2015 8:42 pm
by MaxEPadd
The Bio Mutant that I picked up from DesignerCon and the Bio Monster that I picked up from C2e2
Image
ImageImage

Re: BIO-MASTERS

Posted: Fri Dec 04, 2015 7:11 pm
by Bio-Masters
Awesome!

Re: BIO-MASTERS

Posted: Fri Dec 11, 2015 8:21 pm
by TJOmega
Finally have my own Bio-Mass Monster! His name is Diablo and he is having fun in his new home, but he doesn't trust strangers yet (two of the neighbors should be out of intensive care by next week). Can't wait for these to see production, really want to paint one up.

ImageImageImage

Re: BIO-MASTERS

Posted: Fri Dec 11, 2015 10:57 pm
by THEGODBEAST
TJOmega wrote:Finally have my own Bio-Mass Monster! His name is Diablo and he is having fun in his new home, but he doesn't trust strangers yet (two of the neighbors should be out of intensive care by next week). Can't wait for these to see production, really want to paint one up.

ImageImageImage


So your diggin' Pat's design and my sculpting/prototyping? ;)

Pat is doing an incredible job casting himself now!!! Got to see them all first hand at Dcon. :mrgreen:

Congrats on your score!!!

TGB