The Glyos Connection

Artic_ wrote:First off, VENENOR here is the back of the hub warrior build


Heres a fun Banimon build I made;


I dont remember who made this build,but I enjoyed it enought to try it myself

Thanks for sharing Artic_, once get through sorting my current stash I will definitely be adding that 'bot to my ranks.

The Banimon build looks great. Is it a mech for a standard Banimon fig or is it a mutated Banimon?

As for that last build, that's the good' ole Phase Defender that I believe debuted back in the Council of Travelers drop

Not too much to say about these, but I've been messing around with a couple of small vehicle designs. They only require a Robo Force kit with a couple extra switch pins.

Idk Ven; maybe it's a mech. I just call it chicken legs

I was just wondering if anyone had a build that uses a lot of axis joints, swing joints, and phase arms. I got a bunch in an Onell order that I don't know how to use

ThatGuyNamedJoe wrote:Not too much to say about these, but I've been messing around with a couple of small vehicle designs. They only require a Robo Force kit with a couple extra switch pins.

Little known fact that Vilser Core Neo Sincroids are huge fans of cross country skiing. ^_^

Seriously, though, man, cool builds!

I've had this thing floating around my room for a day that I've been calling Neo Nazgar.



I also had enough parts leftover to assemble him a little drone of destruction.



Time to finally reassemble what these parts originally made...

ThatGuyNamedJoe wrote:I was just wondering if anyone had a build that uses a lot of axis joints, swing joints, and phase arms. I got a bunch in an Onell order that I don't know how to use

Oh man.. Let me upload some older stuff.

ThatGuyNamedJoe wrote:I was just wondering if anyone had a build that uses a lot of axis joints, swing joints, and phase arms. I got a bunch in an Onell order that I don't know how to use

Here's a few of my favs that I saved:

MoralWarfare wrote:

Kranix wrote:

Piotmetans wrote:

And one of mine based on Kranix's Enyriun build:

Aha, I was actually going to post that same one, but here's some others of mine anyway.









Obviously some hubsets thrown in to most of those, but those parts can be substituted with phase arms bits most of the time.

MoralWarfare wrote:Aha, I was actually going to post that same one, but here's some others of mine anyway.









Obviously some hubsets thrown in to most of those, but those parts can be substituted with phase arms bits most of the time.

I might need to build me the third one...

Also, I've got a few more builds to post:

Artic_ wrote:Not sure if I ever showed off these builds before.

These are made with 2 axis joints and a hub set. Almost completely contained

That is mad adorbs. I may have to steal it, if you don't mind.

ThatGuyNamedJoe wrote:Well, I made a Noboto mech...

ThatGuyNamedJoe wrote:I also made a small trio of worker-bots.

ThatGuyNamedJoe wrote:I've had this thing floating around my room for a day that I've been calling Neo Nazgar.

ThatGuyNamedJoe wrote:

Dang, dude. You got prolific real quick. It's awesome to see someone really bring out the build potential of the RF kits, and the little bots are simple and charming. Keep 'em coming!

Oh, right. I make stuff, too.



Prior to his fall at the hands of his former ally Hades, Argen was wrestling with the Villser corruption from within his Axis Joint technology. Unfortunately, the Gendrone turned a blind eye to how the corruption was spreading through his own ranks...



The first mutation came when two Buildman units, both powered with Dual Axis tech, grew too close on the field of battle. In a fit of 'axial rage,' the two warriors turned on one-another...



...and with each blow, exposed more of the Villser within, until it consumed both their forms and merged them into a single, twisted whole.



Yeah, so, contained builds are fun. Two Buildman figures, four Axis Joints, and all that's left are the feet, two heads, and a few M-M parts. It's really surprising how well it can balance on those two little foot pads. Maybe the tail helps?



In Enyriun's absence, the Phaseons became lost to their own Villser obsession. Evolver forms were soon not enough to sate their curiosity...



...but in their pursuits did they leave themselves susceptible to their own form of corruption.



Okay, so, yeah. Five Hub Sets, four Phaseons, three Swings Joints, two Phase Arm / Gobon Blaster sets, and a lot of sore thumbs later, and here we are. Only two Hub Domes and a handful of switch pins remain, which puts this probably the closest to an actual Contained Build I've done. It's also going to be one of the prizes for the "Summer Heatwave" building contest, so if you like it, go take a look!

And speaking of looking: thanks for looking, everyone!

EDIT: I just caught this:

ThatGuyNamedJoe wrote:I was just wondering if anyone had a build that uses a lot of axis joints, swing joints, and phase arms. I got a bunch in an Onell order that I don't know how to use

So here's my attempt at using at least some of these parts:



Caveat: you will need a spare Glyarmor set floating around if you want the full look. It uses four Axis Joint sets and two Phase Arm sets, with a fair amount of M-M bits left over.

kranix wrote:

Dang, dude. You got prolific real quick. It's awesome to see someone really bring out the build potential of the RF kits, and the little bots are simple and charming. Keep 'em coming!

Yeah, I've had a lot of free time lately and finally started to use all these pieces I have laying around, sorry if it's flooding the topic

Also, I really like those builds, specifically the Villser beast. I also might need to try that Glyarmor build, it looks awesome...

kranix wrote:

The Hiver Phaseon.

Holy-geez, kranix.

I was playing around with contained builds for the Zeroid and came up with this little guy:



I've been calling it the Zeroid Sentry Defender.

I also made this little tiki dude after I found a weird face build using the Zeroid upper chest and head.

Some Knights of the Slice builds

These colors work well together;

And some skeletons;

Having some fun with a couple of ARACHSTOR MUSHIs. Who'd of thunk that spy monkey armory parts would blend so well with Kabuto Mushi parts?



I added a abdomen section to give it some more articulation

mechanicoid wrote:Having some fun with a couple of ARACHSTOR MUSHIs. Who'd of thunk that spy monkey armory parts would blend so well with Kabuto Mushi parts?

They go great with plenty other figures Brother Mech, even little ole Crayboth

VENENOR wrote:They go great with plenty other figures Brother Mech, even little ole Crayboth

That's an excellent build, and I love how the details make it look larger than it is. I've been spending too much time in RoboForce land that I've forgotten to exploit all of the other sister line's sculpts.

I don't think I've posted these yet...

Power Armor Skellyman:



Tank:

ThatGuyNamedJoe wrote:I don't think I've posted these yet...
Tank:

I love the old school "Star Wars Mini Rig" feel this one has!

Just making a monster to fight my Knights of the Slice

I loved the idea of Crayboth shoulder pads(cudos to the person who thought of it), so I decided to try it out for a broad results.


And for fun

He's the leader of the bunch
You know him well

He's finally back to kick some tail!

I've been playing around with this one Kabuto Mushi build...